Omnetics High Speed Design
High-speed digital connectors have the same requirements as any other rugged connector: For example, they must meet specifications for shock, force, insertions, and vibration. There are, however, additional requirements that must be addressed in order to ensure proper performance for high-speed applications. With gigabit data rates through connectors now commonplace, the parameters that impact high-speed digital performance must be understood by both connector manufacturers
Material Outgassing Data
Being dedicated to the design and manufacture of quality micro-miniature and nano-miniature connectors. Omnetics Connector Corporation has chosen the highest quality materials, not only for their excellent electrical characteristics, but also for their low outgassing properties. Listed below are the outgassing values of our standard materials.
| Nano Metal Shell Offset Connectors: | %TML | %CVCM | %WVR | |
|---|---|---|---|---|
|
Epoxy |
Standard Epoxy |
0.80 |
0.01 |
0.3 |
|
Epoxy |
High Temperature Epoxy |
0.24 |
0.02 |
0.08 |
|
Ink |
White Epoxy Ink |
0.64 |
0.01 |
0.42 |
|
Ink |
Black Epoxy Ink |
0.74 |
0.01 |
0.54 |
|
Body |
LCP |
0.04 |
0.02 |
0.03 |
|
Body |
PPS |
0.05 |
0.00 |
0.01 |
|
TML = Total Mass Loss CVCM = Collected Volatile Condensable Materials WVR = Water Vapor Regained |
||||
Contact Us Here
Customer Support
Contact Omnetics at
+1-763-572-0656 or
+1-800-343-0025 (North America only)
or find a representative