Micro PSM Series - Type DD

Strip Connector Index
AAAA DDDD FFFF H2H2 SSSS VVVV WDWD
Horizontal SMT Straight Tail Flex Tail Horizontal Thru-Hole Soldercup Vertical SMT Pre-Wired
SpecificationsDimensionsOrdering GuideAccessories/HW

The Dual Row .050” Offset Micro Strip connectors are configured with simple straight tails (Integral or Crimped). Suitable for vertical thru-hole mounting to fine pitch rigid or flex circuits. The straight solid tails are also commonly used in ultra fine wrap terminations, such as electrophysiology. These connectors feature Omnetics' highly reliable gold plated Flex Pin contact system which meets the performance specifications of MIL-DTL-83513. Available with mounting holes suitable for PCB and flex mounting. These connectors are available in standard sizes ranging from 2 through 97 positions as well as custom configurations. Flex design and installation service is also available from Omnetics. Please contact us for more information.

Data Sheet MIL-DTL-83513

 

Dual Row - Offset Straight Tail - Type DD

Electrical Mechanical Specifications
Durability: 500 Cycles
Temperature: -55ºC to 125ºC (200ºC with HTE)
Current Rating: 3 amp per contact
Voltage Rating (DWV): 600 VAC RMS Sea Level
Insulation Resistance: 5,000 Megohms min @ 500 VDC
Shock: 50 G’s discontinuity < 1 microsecond
Vibration: 20 G’s discontinuity < 1 microsecond
Thermal Vaccum Outgassing: NASA SP-R-0022
Contact Resistance: 26 milliohms (65 mV max @ 2.5 amp)
Mating/Unmating Force: Forces not to exceed 6 oz/contact


Material Specifications
Insulator: Polyphenylene Sulfide per MIL-M-24519
Pin: Gold Plated BeCu
Encapsulant: Epoxy
Standard Pin PCB Tail Termination: Solder plate per AMS-P-81728 (Non-RoHS)
RoHS Pin PCB Tail Termination: Hard gold plate per ASTM B488
RoHS Socket PCB Tail Termination: Hard gold plate per ASTM B488
Hard gold plate per ASTM B488