Micro PS1/PS2 Series - Type SS

Strip Connector Index
AAAA DDDD BBBB H2H2 CCCC SSSS WDWD
Horizontal SMT Straight Tail Horizontal Thru-Hole Horizontal Thru-Hole Horizontal Thru-Hole Soldercup Pre-Wired
SpecificationsDimensionsOrdering GuideAccessories/HW

The soldercup tails are commonly used within hand soldering applications, and/or specific wire based devices that require a small robust connector during one of the final phases of production. Whatever your application, these connectors feature Omnetics' gold plated Flex Pin contact system that conforms to the requirements of MIL-DTL-83513. These connectors are available in standard sizes ranging from 2 through 48 positions as well as custom configurations, and accept 26 AWG or smaller stranded wire.

Data Sheet MIL-DTL-83513

 

Single Row - Soldercup - Type SS

Electrical Mechanical Specifications
Durability: 500 Cycles
Temperature: -55ºC to 125ºC (200ºC with HTE)
Current Rating: 3 amp per contact
Voltage Rating (DWV): 600 VAC RMS Sea Level
Insulation Resistance: 5,000 Megohms min @ 500 VDC
Shock: 50 G’s discontinuity < 1 microsecond
Vibration: 20 G’s discontinuity < 1 microsecond
Thermal Vaccum Outgassing: NASA SP-R-0022
Contact Resistance: 26 milliohms (65 mV max @ 2.5 amp)
Mating/Unmating Force: Forces not to exceed 6 oz/contact


Material Specifications
Insulator: Polyphenylene Sulfide per MIL-M-24519
Pin: Gold Plated BeCu
Encapsulant: Epoxy
Standard Pin PCB Tail Termination: Solder plated per AMS-P-81728 (Non-RoHS)
RoHS Pin PCB Tail Termination: Hard gold plate per ASTM B488
RoHS Socket PCB Tail Termination: Hard gold plate per ASTM B488
Hard gold plate per ASTM B488